49-AUD-03 Audi Quadlock Steering Wheel Control Interface (With Amplifier Turn On)
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 49-AUD-03
- EAN: 7427282738378
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Audi | A3 | 2006 - 2013 | (8P) facelift & 8PL |
| Audi | A4 | 2001 - 2009 | Cabriolet |
| Audi | A4 | 2005 - 2008 | (B7) |
| Audi | TT | 2006 - 2014 | MK2 (8J) |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
This CANBUS steering wheel control interface will allow you to retain the use of the steering wheel audio controls.
Gives volume, seek, source, and telephone commands to an after market radio.
The quadlock adapter has 4x phono pre-out connectors to integrate with the original amplifier in the car.
The CANBUS interface will generate an ignition power supply to the new radio, via the red wire. it will also give out an illumination signal, (orange) speed pulse signal (pink), reverse gear positive output (Purple), Handbrake negative (Green) and Mute out (Yellow/Black)
This provides a CAN signal to switch on the amplifier
What's Included
- 49-AUD-03 Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
FOR CHINA UNITS YOU WILL NEED 49-000
| Radio Being Fitted | Part Number | Short Description |
| Chinese/ Unbranded | 49-000 | Patch lead for 49- Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereo. |
| Alpine | 49-001 | Patch lead for 49- series steering wheel control for Alpine stereo. |
| Clarion | 49-003 | Patch lead for 49- series steering wheel control for Clarion stereo. |
| JVC | 49-004SW | Patch lead for 49- series steering wheel control for JVC stereo. |
| Kenwood | 49-005 | Patch lead for 49- series steering wheel control for Kenwood stereo. |
| Pioneer | 49-007 | Patch lead for 49- series steering wheel control for Pioneer stereo. |
| Sony | 49-008 | Patch lead for 49- series steering wheel control for Sony stereo. |
| Zenec | 49-011 | Patch lead for 49- series steering wheel control for Zenec stereo. |
| Universal | 49-025 | Self pinning (instructions included) patch lead for 49- series steering wheel control for Alpine, Clarion, JVC, Kenwood, Pioneer or Sony stereo. |
PATCH LEAD INCLUDED FOR MOST BRANDED RADIOS
CHINA UNBRANDED RADIO MAY REQUIRE ADDITIONAL PATCH LEAD AT ADDITIONAL COST
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
