Wiring Harness ISO stereo harness adaptor leads allow the connection of your new after-market head unit to the original radio connector without the need to cut any of the existing wiring. Supported radio include Alpine, Beat, Blapunkt, Clarion, JVC, Kenwood, Pioneer, Panasonic, Sony, Zenec. It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and the other end into your new radio, without the need of tools or cutting of wires.
2 YEAR WARRANTY
Brand: Connects2
Model: CT20BM03
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
£14.99
Ex Tax:£14.99
2 YEAR WARRANTY
Brand: Connects2
Model: CT20BM02
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
£9.99
Ex Tax:£9.99
2 YEAR WARRANTY
Brand: Connects2
Model: CT20BM06
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
£79.99
Ex Tax:£79.99
2 YEAR WARRANTY
Brand: Connects2
Model: CTHUE-BM1
Connects2 Head Unit Replacement Interface when installing an aftermarket head unit in vheicles that do not have a 12V ignition feed, such as CAN-BUS vehicles. The interface generates an ignition feed by sensing the voltage on engine cranking which then creates a stable, reliable 12V feed for the aft..
£39.99
Ex Tax:£39.99
2 YEAR WARRANTY
Brand: Connects2
Model: CT20BM01
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
£9.99
Ex Tax:£9.99
2 YEAR WARRANTY
Brand: Connects2
Model: CT20BM05
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
£59.99
Ex Tax:£59.99
2 YEAR WARRANTY
Brand: Connects2
Model: CT20RO01
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
£9.99
Ex Tax:£9.99
2 YEAR WARRANTY
Brand: Connects2
Model: CT20RO01
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
£9.99
Ex Tax:£9.99
2 YEAR WARRANTY
Brand: InCarTec
Model: 20-102
Car radio adapter cable for converting BMW style 17 pin connector to ISO connectors suitable for European after-market car radio's connectors.Suits older BMW, Mini cars and some Land Rover & Rover models.for BMW 5 series E39 check the radio connector first as it c..
£19.99
Ex Tax:£19.99
2 YEAR WARRANTY
Brand: Focal
Model: IW-BMW-YISO
Adaptation Cable for the IMPULSE 4.320 Compact 4-channel Digital AmplifierThe Focal Inside BMW/MINI Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the BMW/MINI original head unit and of ..
£49.99
Ex Tax:£49.99
2 YEAR WARRANTY
Brand: Connects2
Model: CT51-BM01
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..
£79.99
Ex Tax:£79.99
2 YEAR WARRANTY
Brand: InCarTec
Model: 20-263
For BMW cars built before 2002 with 17 pin Round connector and HARMON KARDON amplifier upgrade.Retains the use of the amplified audio system, including subwoofer.This cable has phono cable plugs for low level pre-out connection to the new car radio.
This cable has a 12volt turn on wire. It ..
£24.99
Ex Tax:£24.99
2 YEAR WARRANTY
Brand: Connects2
Model: CT51-BM04
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..
£39.99
Ex Tax:£39.99
2 YEAR WARRANTY
Brand: InCarTec
Model: 10-125
Quadlock 24 Way Extension Cable24 way micro connector extension cable for Quadlock SOT leadsThis cable is for extending the 24 small micro terminals used in the "quadlock" audio connector in some European cars like BMW, VW, Peugeot and Citroen.
Eg. use this cable to convert our st..
£29.99
Ex Tax:£29.99
2 YEAR WARRANTY
Brand: InCarTec
Model: 20-103
BMW Quadlock to ISO connectors for connecting a car to an aftermarket car radio.
This harness is for cars without Steering wheel controls and for cars that have a12v ignition supply included in the Quadlock connector.For cars with steering wheel controls please use 29-628Harness Adaptor..
£19.99
Ex Tax:£19.99
2 YEAR WARRANTY
Brand: Connects2
Model: CT51-BM02
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.Please check connection before ordering, this item is only for Round Pin connection type.&n..
£34.99
Ex Tax:£34.99
2 YEAR WARRANTY
Brand: InCarTec
Model: 23-243
MOST Fibre optic interface to allow the fitting of a new head unit into a BMW with the TOP HI FI SYSTEM (Logic 7/ Harman Kardon) original audio and retain the use of the fibre optic amplifier. You will lose front to rear fading ability.if the car has speaker wiring in the Quadlock ..
£239.99
Ex Tax:£239.99
2 YEAR WARRANTY
Brand: Connects2
Model: CT51-BM03
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.Please check connection before ordering, this item is only for Round Pin connection type.&n..
£34.99
Ex Tax:£34.99
2 YEAR WARRANTY
Brand: Connects2
Model: CT20BM02
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
£9.99
Ex Tax:£9.99Showing 1 to 19 of 19 (1 Pages)