InCarTec

Standard two prong radio release keys used on Blaupunkt, Grundig, VDO, Philips style radios.STEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent ster..

Toyota 2009 onward to male din antenna adapter cable.The Toyota connector is rectangular with a round antenna terminal inside.The loose blue wire needs to be connected to the blue antenna turn on wire output on the new stereo. This will need to be spliced into the wire if there is not a loos..

Audio cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.Includes CANbus 12v accessory ignition supplyThe car has CAN bus data. The interface provides a key in ignition supply from the data.Harness Adaptors ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionIncludes cage kit so the aftermarket cage supplied with the new radio will not be needed.The fascia is angled to allow the cage to fit tilting backwards for an easier fit int..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Iveco Daily (2014-2019) vehicles with original Delphi DAB radiosPackage IncludesDouble Din Fascia (Matt Black) CANbus Steering Wheel Control Interface DIN to DAB/..

Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls in BMW 3 series (E90/E91/E92/E93) car models.This is an alternative kit to FK-746/1Package IncludesDouble Din Fascia Adaptor (MATT BLACK) Steering Wheel Control Interface Antenna..

Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket version This fascia kit has a removable pocket depending on the installation.Also has side fixing brackets so no radio cage kit is requiredFits Mazda RX8 car models.C..

Provide a full sound upgrade to your Abarth, Citroen, Fiat or Vauxhall front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Abarth, Citroen, Ford, Fiat, Holden, Iveco, Peugeot and Vauxhall vehicle models. Please see our compatibility list for more..

A pair of front door car speaker adapter panels for 200mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, mo..

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel audio controls in Volvo C30/C70/S40 and V50 car models (WITH AMPLIFIED SOUND SYSTEMS)This kit also retains phone button controls, warning chimes/parking sensor audio and provides output..

Retain original Camera on Highline Volkswagen, Seat and Skoda cars with Volkswagen RNS510, RNS315, RCD510, Seat Trinax and Skoda Bolero or Columbus head units.Retains the original highline reverse camera with an aftermarket head unit. Moving guide lines are not retained.This Camera interface..

Steering wheel control interface and adapter cable for various Mercedes cars to fit an aftermarket radio upgrade.The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.The CANbu..

This is for power supply and speakers only. The cable is  to connect Daihatsu, Perodua, Scion, Subaru, Toyota cars  to an after-market European car radio with ISO style connectors.For all Toyota cars with standard audio systems (without amplifiers)For cars with steering..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit in Citroen Berlingo and Peugeot Partner (2008-2018) car and van models.{ vehicle_compatibility }Package IncludesDouble Din Fascia Adaptor Trim (Matt Black) Fakra to Din Antenna Adaptor 103..

Male to female ISO connectors for connecting a European car radio to cars with ISO style connectors.This cable is an extension of the iso wiring. It is usefull on car radio's with recessed iso connectors in the back of the head-unit as the cables on the car loom may not be long enough.Ha..

A pair of Speaker adapter cables used to connect after market speakers to the original loom on Citroen C1 and Peugeot 107, 108 vehicle models.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in th..

Car radio fascia adaptor panel to allow the fitting of an aftermarket Double Din car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia is supplied with a fitting cage so no addi..

Multimedia Steering wheel control interface for various Seat and VW cars with select Kenwood models with the EXT/IF (UART) connector.Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version Fits Mitsubishi Lancer (2005-2008) car models.A removable pocket is included for Single DIN installation.COLOUR: DARK GREYIf fitting a double din unit you ..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This..