InCarTec

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in select Mercedes Sprinter (2019 - 2023) vehicle models with original open dash or single DIN standard radios.Package IncludesDouble Din Fascia Adaptor (Matt Blac..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

A pair of 87mm (3.5 inch) 4ohm, 80W 2-Way Coaxial speakers{ vehicle_compatibility }SpecificationsDimension: 87mm Material: Polycarbonate cone - Steel basket Suspension: Butyl rubber Max Power: 80 Watt Frequency Response: 100-20 KHz Efficiency: 87 dB (1W / 1mt) * Impedance:..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This..

InCarTec 85-213 Sliding Door Contact Pad Pin SwitchUniversal Automotive Sliding Door Contact Pad Pin SwitchThis universal sliding door contact switch is designed to easily get power to the door lock actuators mounted in the sliding doors on vans. Used to install central locking motors in sli..

Complete fitting kit to install a Double DIN after-market head unit and retain the original steering wheel controls in Kia Optima (2011-2015) car models WITH BASIC AUDIOPackage IncludesFascia Adaptor (Matt Black) Steering wheel control interface Universal patch lead (Included..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. Fits..

Universal self pinning patch lead for InCar Tec 39 series CANBUS steering wheel control interfacesThis is a spare part needed if you re-use a 39 series interface on a different head-unit..

Car radio fascia adaptor panel to allow the fitting of an aftermarket single or double DIN car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.Use the supplied pocket with the fascia ..

InCarTec 83-230 5 Pin Relay Holder (12v 80amp) With Bare 300mm Wires5 Pin Relay Holder (12v 80amp) Terminates in bare wires, approximately 300mm in length and 12awg. Suitable for a range of automotive applictions...

Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket versionFits Nissan 350Z Coupe and Roadster with the facelift dashboard, built between 2003 - 2010. The facelift dashboard has the hazard warning light switch below the air con..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 144 mm Height: 38 mmPlease make su..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

CANbus steering wheel control interface for Fiat/ Alfa Romeo, Citroen, Lancia, Peugeot, Vauxhall vehicles with the larger-style connector behind the radio.This interface uses a larger style connection behind the original radio to allow the use of the original steering wheel control buttons with ..

CANBUS interface to maintain the steering wheel controls. This interface will also adapt from the quadlock connector in the car to standard after market ISO connectors. Provides a CANbus, powered antenna, ignition output, speed pulse, reverse gear signal and hand brake signal. This interface will..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This..

CANBUS steering wheel control interface for Volkswagen with original Comand APS NTG2.5 head units.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs a..

Interface to retain the audio steering wheel controls (including phone button) in a Volkswagen car and also retain parking sensor and climate control display which is normally displayed on the CDR510 radio. The PDC and climate info is shown on the cars central display between the clocks, DOES NOT PU..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFits Subaru car modelsCOLOUR: MATT BLACKOnly for cars that do not have factory fitted satellite navigation. Important Fascia NotesThe fascias are made..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. Fasc..