InCarTec

A Pair of 6X9 speaker spacer rings for 6"x9" speakersSpeaker size: 6x9 Mounting hole diameter: 154mm x 227mm Outer Diameter: 186mm x 260mm Thickness 18mmPlease make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, mode..

Isuzu D-Max, Mazda antenna adapter to retain the original FM and DAB antennas. For 2021 onward (facelift) vehicles with amplified antenna.  Also fits some later model Mazda, Honda and Suzuki cars without a separate DAB module and a combined FM and DAB antenna connection.Aerial AdaptorA..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW 3-Series (F30, F31, F34) and 4-Series (F32, F33, F36) car models (WITH NON-AMPLIFIED SYSTEMS)This kit also retains the OEM factory climate controls, as well as the..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Kia Sportage (2010-2015) car models) with OEM factory fitted Navigation systemsThis fitting kit only works on Kia Sportage models with OEM factory navigation systems. Not ..

CANbus steering wheel control interface for cars with Quadlock connectors behind the radio.This interface will also allow the steering wheel controls to access the display screen menu. The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.This..

Replacement car audio radio facia to enable you to change the original radio in the car for an "L shaped Single DIN chassis" with a chassis at the lower end (e.g. Alpine ILX705D) or for 6.8 inch modular aftermarket head units like (e.g. Pioneer EV062 or EVO64)Fits Toyota Corolla E210 2..

InCarTec 85-212 Crimping ToolCrimping tool for a variety of non-insulated open end terminals. 0.5-2.5mm. Tool length, 21cm...

Adaptor cable to convert Stallantis vehicles with the 2016 onwards NAC radios to a standard ISO connector for fitting an aftermarket head unit.The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, and and illumination output on most cars. Ins..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.Suitable for Honda Civic (2000-2005), CR-V (2001-2006) and Odyssey (1999-2..

Complete stereo upgrade fitting kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in Mercedes M-Class (W164) (2005-2010) vehicles with Standard AudioPackage IncludesSingle / Double Din Fascia (Matt Black) Steering Wheel Control Int..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version, comes with a removable pocket for single DIN fittings and side fixing brackets so no double DIN cage is needed.Fits Chrysler, Jeep and Dodge car models with original..

Car Audio Steering wheel interface and ISO cables allowing use of the vehicles original steering wheel buttons with a new aftermarket head-unit.This interface also provides power and speaker connections from the car.Suitable Renault based cars and vans without separate display with either &q..

A pair of rear side shelf car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your mak..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version. Fits Abarth car models.COLOUR: MATT BLACKCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in som..

Amplifier bypass cable for Lexus RX (XU30) built between 2003 - 2009 with original Mark Levinson Sound SystemAllows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the rear seat.Comes with a 5m speaker extension to ex..

Replacement car audio facia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.T..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket versionThe fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.Use the supplied poc..

Reverse view high level brake light camera and video monitor kit specially designed for Vauxhall Vivaro, Renault Trafic, Nissan NV300 (2014 Onwards) and Fiat Talento (2016 Onwards) vehicle models.    The camera included in this kit replaces the high level brake light at the rear of the..

Complete replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia comes with side fixing brackets so no additional fitting cage is required.Fits Hyundai IX35 (2010 - 2015) and Tucson (2009 - 2015) car modelsCOLOUR: MA..

Complete sub amplifier fitting kit to install a monoblock amplifier in a Range Rover L322 or BMW X5 (E53) with original DSP amplifier to retain the subwoofers when changing to an aftermarket radio.This amplifier fitting kit includesBLAM Ultra Compact D Class 4 x 75W Mono Block Amplifier&n..