InCarTec 21-139 VW Double Fakra to Male Din Antenna Adaptor Cable (With 12V Phantom Power)
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 21-139
- EAN: 7427282745833
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
Make | Model | Years | Notes |
Volkswagen | Amarok | 2009 - 2017 | |
Volkswagen | Amarok | 2018 - 2022 | |
Volkswagen | Arteon | 2017 onward | |
Volkswagen | Caddy | 2010 - 2016 | (3rd Gen Facelift 1.0) |
Volkswagen | Caddy | 2016 - 2020 | (3rd Gen Facelift 2.0) |
Volkswagen | Crafter | 2017 onward | 2nd Gen (Type: SY/SZ) |
Volkswagen | Eos | 2006 - 2015 | |
Volkswagen | Golf | 2012 - 2018 | Mk7 (5G) |
Volkswagen | Polo | 2017 onward | Mk VI |
Volkswagen | T-Cross | 2019 onward | |
Volkswagen | T-Roc | 2017 onward | |
Volkswagen | Touran | 2015 onward | II |
Volkswagen | Transporter | 2019 onward | T6.1 |
Volkswagen | UP! | 2012 onward |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Double Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)
This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.
This cable converts the original antenna connector in the car, known as a Double Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.
The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.
The phantom power feed terminates in a junior timer receptacle terminal to make it easy to connect into the electric antenna turn on position of a standard ISO connector. We also have this part available with a male bullet connector to make the phantom power lead easier to connect to ISO cables and steering wheel control interfaces with a female bullet connection for the electric antenna turn on, the 21-139K.
Aerial Adaptor
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Antenna Adaptor for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.