InCarTec 23-229-NAV Interface for Honda Civic and CRV (EU) with OEM Navigation
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 23-229-NAV
- EAN: 7427282692250
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
Make | Model | Years | Notes |
Honda | Civic | 2012 - 2017 | 9th Gen |
Honda | CR-V | 2012 - 2017 | 4th Gen |
NOT SUITABLE for retaining steering wheel controls on Chinese/unbranded head units with 2 wire SWC interface (KEY1/KEY2)
Fitting instructions can be found HERE
Interface to connect to the CAN ignition of EU models of the Honda Civic and CRV (2012-2017) and provide ignition output as well as interfacing with the steering wheel controls and amplifier.
Suitable for European models of the Honda Civic (FK) (2012-2017) and Honda CR-V (2012-2017) with original OEM navigation.
- Retains steering wheel controls (pre-programmed)
- Retains phone buttons (hard wired)
- CAN ignition output
- Reverse Output, Speed Pulse and Parking Brake Outputs
- Retains factory amplifier and subwoofer
- Retains ability to view clock
- Comes with patch lead included
Clock remains functional but manual clock setting will not be available. To change time, vehicle battery must be disconnected and then reconnected at 1:00 as this is the default time that the clock starts at. Disconnecting the battery permanently removes the date without factory head unit installed.
To retain reverse camera, use this product in conjunction with 27-269 camera retention interface.
What's Included
- 23-229-NAV Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
- China Units
Patch lead INCLUDED for the steering controls depending on the make of radio being fitted.
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.