Freelander 2, Discovery 3 and Range Rover Sport with standard audio system. Car Audio Steering wheel interface and iso connectors allowing use of original buttons with a new aftermarket head-unit.

For Freelander with Parking sensors use item 25-518-PDC in addition to this interface.

NOT SUITABLE FOR CARS WITH ORIGINAL ALPINE PREMIUM SOUND SYSTEM OR HARMAN/KARDON AMPLIFIED SYSTEMS

If your car has an amplified speaker system you will need to bypass the amplifier located in the drivers side rear quarter panel or under the driver's seat.

What's Included

• 29-658 Steering Control Adaptor
• Stereo Patch Lead

Works with the following brands

• Alpine
• Clarion
• JVC
• Kenwood
• Pioneer
• Sony
• China Units

Patch lead INCLUDED  for the steering controls depending on the make of radio being fitted.

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE

• China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
   
• Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.

We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.