InCarTec 29-679 Honda Accord, CR-V, Jazz Steering Control Interface And Radio Adaptor Cable
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 9
- Brand: InCarTec
- Model: 29-679
- EAN: 7426871619197
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Honda | Accord | 2008 - 2015 | 8th Gen |
| Honda | CR-V | 2007 - 2011 | 3rd Gen |
| Honda | CR-Z | 2010 - 2016 | |
| Honda | Insight | 2010 - 2014 | 2nd Gen |
| Honda | Jazz | 2008 - 2014 | 2nd Gen |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Steering wheel control interface and adapter cable for Honda Accord, CR-V, CR-Z, Insight and Jazz cars to fit an aftermarket radio upgrade.
The cable adapts from the 24 pin Honda connector with a locking latch in the car to standard aftermarket ISO connectors. This replaces the needs for a separate ISO radio replacement adapter cable.
The steering wheel control interface is built into the adapter cable, just one loose wire needs to be connected.
The interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and telephone buttons.
This interface needs to be used with a 29- series patch lead. This links the steering wheel control interface to the steering wheel control input on the back of the new stereo.
What's Included
- 29-679 Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
- China Units
Patch lead INCLUDED for the steering controls depending on the make of radio being fitted.
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
