InCarTec 29-721 Land Rover Range Rover Vogue 2002-2010 Steering Wheel Control Adaptor Interface (Cars with NAV and DSP Amplifier)
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 29-721
- EAN: 7427306994483
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Land Rover | Range Rover Vogue | 2002 - 2010 | III (L322) |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Adaptor cable to fit an aftermarket stereo upgrade in a Land Rover Range Rover L322 car with original high line head unit and DSP amplifier and retain the use of the steering wheel controls.
This cable adapts from the original connector in the car, known as a quadlock, to standard aftermarket connectors for the new stereo, known as ISO connectors.
The built in interface will allow the original audio controls on the steering wheel to work with an aftermarket radio.
This adapter cable is installed along with the Range Rover L322 amplifier bypass cable. When used with the bypass cable, it will also provide speed pulse and reverse gear signals to the new radio.
Plug and play installation when used with the Amplifier Bypass Cable
What's Included
- 29-721 Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
- China Units
Patch lead INCLUDED for the steering controls depending on the make of radio being fitted.
| Radio Being Fitted | Part Number | Short Description |
| Resistive Programming (Loose Wire) | 29-000 | Loose wire Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-001 | Patch lead for 29-Series Steering wheel control for Alpine stereos. |
| Clarion | 29-003 | Patch lead for 29-Series Steering wheel control for Clarion stereos. |
| JVC (Single Wire) | 29-004SW | Single Wire Patch lead for 29-Series Steering wheel control for JVC stereos. |
| Kenwood | 29-005 | Patch lead for 29-Series Steering wheel control for Kenwood stereos. |
| Pioneer | 29-007 | Patch lead for 29-Series Steering wheel control for Pioneer stereos. |
| Sony | 29-008 | Patch lead for 29-Series Steering wheel control for Sony stereos. |
| Resistive Programming (3.5 Jack) | 29-016 | 3.5mm Jack Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Universal | 29-025 | Self-Pinning Patch lead for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive programming head units with either two wires or a 3.5mm jack. |
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
