Car audio steering wheel control interface designed for select Ford car models with small red/ orange display and M button on the steering wheel.

This cable will retain the use of the vehicles factory steering wheel controls when fitting aftermarket head-unit and allow use of the factory functions on the red/ orange display. 

To access menu functions after installation, you will need to remove the aftermarket hazard switch and plug the original back in.

Suitable for select Ford vehicles with smaller red display with right hand buttons, M button on the steering wheel and the below connections from factory radio. 

Please ensure you check your vehicles original radio connections and compatibility before ordering

What's Included

• 29-760 Steering Control Adaptor
• Stereo Patch Lead

Works with the following brands

• Alpine
• Clarion
• JVC
• Kenwood
• Pioneer
• Sony
• China Units

Patch lead INCLUDED  for the steering controls depending on the make of radio being fitted.

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE

• China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
   
• Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.

We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.