InCarTec 29-UC-050-MB05 VW Audio 5/Sound 5 Steering Wheel Control Interface (ISO CONNECTION)
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 29-UC-050-MB05
- EAN: 7427282725675
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Volkswagen | Crafter | 2006 - 2016 | 1st Gen (Type 2E/2F) |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse, handbrake and illumination signals.
The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation
This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume and track skip buttons.
The CANbus interface will also provide ignition, illumination, reverse gear, handbrake and speed pulse outputs.
This is an alternative to 39-MB-A05
Cars with original harman/kardon or BOSE amplified audio systems will require an additional interface to retain the audio with the original amplifier.
This interface is only suitable for Mercedes vehicles with factory fitted Audio 5/Sound 5 systems also (Volkswagen Crafter RCD2001)
What's Included
- 29-UC-050-MB05 Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
- China Units
Patch lead INCLUDED for the steering controls depending on the make of radio being fitted.
| Radio Being Fitted | Part Number | Short Description |
| Resistive Programming (Loose Wire) | 29-UCCAB-000 | Loose wire Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-UCCAB-001 | Patch lead for 29-UC Series Steering wheel control for Alpine stereo. |
| Clarion/ JVC | 29-UCCAB-003 | Patch lead for 29-UC Series Steering wheel control for Clarion/JVC stereos. |
| Kenwood/ JVC (Single Wire) | 29-UCCAB-005 | Single Wire Patch lead for 29-UC Series Steering wheel control for Kenwood/JVC stereos. |
| Pioneer/ Sony | 29-UCCAB-007 | Patch lead for 29-UC Series Steering wheel control for Pioneer/Sony stereos. |
| Resistive Programming (3.5mm Jack) | 29-UCCAB-016 | 3.5mm Jack Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Universal | 29-UCCAB-SET | Patch lead set for 29-UC Series Steering wheel control for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. |
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
