InCarTec 29-UC-050-MB2 Mercedes CANBus Steering Wheel Control Interface Adaptor
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 29-UC-050-MB2
- EAN: 7427282714235
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Mercedes-Benz | A Class | 2005 - 2011 | (2nd Gen) W169 |
| Mercedes-Benz | B Class | 2005 - 2011 | (1st Gen) W245 |
| Mercedes-Benz | C Class | 2004 - 2007 | (2nd Gen) W203 Facelift |
| Mercedes-Benz | CL | 2000 - 2006 | (2nd Gen) C215 |
| Mercedes-Benz | CLC | 2008 - 2011 | (CL203) |
| Mercedes-Benz | CLK | 2005 - 2009 | (C209) facelift |
| Mercedes-Benz | CLS | 2005 - 2010 | 1st Gen (W219) |
| Mercedes-Benz | G Class | 1997 - 2011 | |
| Mercedes-Benz | G Class | 2012 - 2018 | |
| Mercedes-Benz | M Class | 2005 - 2010 | (W164) |
| Mercedes-Benz | M Class | 2011 - 2019 | (W166) |
| Mercedes-Benz | R Class | 2006 - 2012 | (V251) |
| Mercedes-Benz | SLK | 2009 - 2011 | (R171) facelift |
| Mercedes-Benz | Sprinter | 2007 - 2018 | (W906) NCV3 |
| Mercedes-Benz | Viano | 2004 - 2014 | (W639) |
| Mercedes-Benz | Vito | 2003 - 2014 | 2nd Gen (W639) |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
CANbus steering wheel control interface for various Mercedes cars.
Gives CANbus Ignition outputs and retains steering wheel controls.
The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.
This CANbus interface will allow you to retain the audio steering wheel controls when installing an after market head unit in various Mercedes vehicles.
This interface will also allow the steering wheel controls to access the display screen menu.
The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.
This part is an alternative to 49-MB-02
SLK Note: Use this interface for later models R171 with the steering control buttons in a circular cluster. This change of steering wheel happened around 2008 models.
What's Included
- 29-UC-050-MB2 Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
- China Units
Patch lead INCLUDED for the steering controls depending on the make of radio being fitted.
| Radio Being Fitted | Part Number | Short Description |
| Resistive Programming (Loose Wire) | 29-UCCAB-000 | Loose wire Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-UCCAB-001 | Patch lead for 29-UC Series Steering wheel control for Alpine stereo. |
| Clarion/ JVC | 29-UCCAB-003 | Patch lead for 29-UC Series Steering wheel control for Clarion/JVC stereos. |
| Kenwood/ JVC (Single Wire) | 29-UCCAB-005 | Single Wire Patch lead for 29-UC Series Steering wheel control for Kenwood/JVC stereos. |
| Pioneer/ Sony | 29-UCCAB-007 | Patch lead for 29-UC Series Steering wheel control for Pioneer/Sony stereos. |
| Resistive Programming (3.5mm Jack) | 29-UCCAB-016 | 3.5mm Jack Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Universal | 29-UCCAB-SET | Patch lead set for 29-UC Series Steering wheel control for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. |
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
