CANBUS steering wheel audio control and CANbus interface for select Renault vehicles with either "Update List" radios or a seperate display above the original radio.

This interface will retain the use of the steering wheel control buttons when fitting an after market head unit, as well as providing CANbus outputs, ignition, illumination, speed pulse, handbrake and reverse gear.

The CANBUS steering control signal runs through the display or original navigation unit, if the display or navigation unit is removed this interface will not function.

What's Included

• 29-UC-050-REN1 Steering Control Adaptor
• Stereo Patch Lead

You have a choice from the following patch leads

• Alpine
• Clarion
• JVC
• Kenwood
• Pioneer
• Sony
• China Units

Patch lead INCLUDED  for the steering controls depending on the make of radio being fitted.

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE

• China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
   
• Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.

We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.