InCarTec 50-313 Mercedes SLK (2004-2011) Single / Double Din Car Radio Fascia Adaptor Panel (FLUSH FIT)
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 50-313
- Other Part #: CT24MB13
- EAN: 7427307021058
- Warranty: 2 Years Warranty
Description
Car radio fascia adapter panel to allow the fitting of an aftermarket Single or Double DIN car stereo upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.
The fascia is a flush mount fascia, giving a very tidy and professional finish to the installation.
Use the supplied pocket with the fascia adapter to fit a single din radio, or remove the pocket and use the fascia trim only with a 103mm fitting cage to fit a double din aftermarket head unit. Most aftermarket radios are supplied with a 113mm high cage, because of this an additional 103mm fitting cage is required.
Product Compatibility Chart
| Make | Model | Years | Notes |
| Mercedes-Benz | SLK | 2004 - 2008 | Class (R171) |
| Mercedes-Benz | SLK | 2009 - 2011 | Class (R171) facelift |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Below is an image of a stereo fitted using this fascia.
COLOUR: MATT BLACK (RUBBER TOUCH)
PLEASE NOTE: For Double DIN installation an additional 103mm fitting cage is required
Important Fascia Notes
- China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
- We do not take any responsibility for China units not fitting as they are not industry standard size.
- If the cage supplied with the stereo does not fit the fascia then you must purchase a universal cage which is slightly smaller.
- Click here for CT23UN01 UNIVERSAL Mounting Cage
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fascia for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.
