Replacement car audio fascia to enable you to change the original radio in the car to a Single and Double Din aftermarket version

The fascia kit is supplied with a replacement dash top panel to allow the fitting of the Double Din unit into the dashboard, where usually only a single DIN would fit.

Will not fit the Brazilian built Fiat Fiorino (Type 327). Some modification to the original dashboard is required.

If fitting a double din unit you will also require a 103mm deep cage (51-012) to replace the cage supplied with your aftermarket head-unit. A removable pocket is supplied for fitting single DIN radios.

Important Fascia Notes

• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.
• If the cage supplied with the stereo does not fit the fascia then you must purchase a universal cage which is slightly smaller.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fascia for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.