InCarTec FK-172-SWC1-T VW Single Din Stereo Upgrade Fitting Kit (Steering wheel controls) RCD300 RCD500
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: FK-172-SWC1-T
- EAN: 7427282738552
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Volkswagen | Caddy | 2004 - 2009 | (3rd Gen Pre-Facelift) |
| Volkswagen | Eos | 2006 - 2015 | |
| Volkswagen | Golf | 2004 - 2008 | Mk5 (1K) |
| Volkswagen | Jetta | 2006 - 2010 | V |
| Volkswagen | Passat | 2005 - 2010 | B6 |
| Volkswagen | Touran | 2003 - 2010 | I |
This fitting kit is compatible with Volkswagen cars fitted with original RCD300, RCD500 or RNS-MFD-2 head units that have a twin Fakra antenna connection, Please see pictures below.
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars
This kit fits cars with original RCD300, RCD500 or RNS-MFD-2 radio.
Package Includes
- Single Din Fascia Adaptor With Removable Pocket
- Steering Wheel Control Interface
- Twin Fakra Antenna Adaptor (12v Phantom Power) With Bullet Connection
- Universal patch lead (Included)
Fascia Adaptor
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
This fascia kit comes with a removable pocket. For double DIN installations, the central bar needs to be cut out and a radio cage used.
Steering Control Adaptor
A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.
The CANBUS interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source, mute and phone buttons from the steering wheel with the new radio. The CANBUS interface will also provide ignition, illumination, speed pulse, reverse gear and handbrake outputs signals to the new stereo.
Aerial Adaptor
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
Twin fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection. This antenna adapter cable adapts from the original twin fakra connectors in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.
Universal Patch Lead
Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.
FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.
