InCarTec FK-391-SWC Dacia Single Din Stereo Fitting Kit MATT BLACK (WITH SWC)
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: FK-391-SWC
- EAN: 7427282743525
- Warranty: 2 Years Warranty
Available Options
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Dacia | Dokker | 2012 onward | Van |
| Dacia | Dokker | 2012 - 2021 | |
| Dacia | Duster | 2010 - 2017 | (1ST Gen) |
| Dacia | Lodgy | 2012 - 2022 | |
| Dacia | Logan | 2012 - 2020 | (2nd Generation) |
| Dacia | Sandero | 2012 - 2020 | (2nd Generation) |
| Dacia | Sandero | 2012 - 2020 | Stepway |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in select Dacia Duster, Dokker, Lodgy, Logan and Sandero car models.
Package Includes
- Single Din Fascia Adaptor (MATT BLACK)
- Steering Wheel Control Interface
- Male Fakra to Male Din Antenna Adaptor
- Universal Patch Lead (Included)
Fascia Adaptor
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
Steering Wheel Control Interface
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.
This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.
Aerial Adaptor
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
Male Fakra to Male DIN antenna adapter cable.
This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade.
This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.
Universal Patch Lead
Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit.
Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.
FOR CARS WITHOUT STEERING WHEEL CONTROLS PLEASE USE FK-391
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.
