Complete stereo upgrade fitting kit to install a Double Din aftermarket car stereo head unit in select Nissan Juke (2010-2014) vehicle models with standard CD radios (usually found in Visia spec model variants)

Package Includes

• Double Din Fascia Adapter (Matt Black)
• Rectangle to Din Car Aerial Antenna Adapter Cable
• Radio ISO Adapter Cable

This fitting kit is only suitable for vehicles without steering wheel controls. For vehicles with steering wheel controls please use FK-797-SWC

Fascia Adaptor

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version  This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

Radio ISO Adapter Cable

Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 20 pin Nissan connector to standard aftermarket ISO connectors.

This cable includes the power and speaker supply.

Rectangle to Din Car Aerial Antenna Adapter Cable

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.  

Nissan grey rectangle female antenna connector to male DIN car aerial antenna adapter cable. This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket stereo.

The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.

The phantom power feed terminates in a male bullet connector to make the phantom power lead easier to connect to ISO cables and steering wheel control interfaces with a female bullet connection for the electric antenna turn on.

This antenna adapter also comes with a spare female bullet connector or T-Tap connection to connect directly into the electric antenna turn on.

COLOUR: MATT BLACK

Important Fascia: 

• The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification"  may be  necessary or needed.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the shape & connection in the picture listed is the same as you have in your vehicle. If in doubt please Contact US with your vehicle details and we will confirm what you require.