Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls in Isuzu D Max (2012-2020) and Izuzu MU-X (2013-2020) vehicle models.

Package Includes

• Double Din Fascia Adaptor (MATT GREY)
• Steering Wheel Control Interface
• Antenna Adaptor
• Universal patch lead (Included)

This fascia includes 3 different trim solutions depending on the radio head unit

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

For Single DIN fitting you will need to purchase an additional pocket.

Measurements for the inner side of the trims are as follows:

• Trim 1 - 172mm wide x 97mm high
• Trim 2 - 173mm wide x 98mm high
• Trim 3 - 178mm wide x 100mm high

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit. This interface includes PHONE commands for compatible Bluetooth head-units.

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.  

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.