InCarTec FK-801-AUTO-SWC Hyundai i20 (2012-2014) Double DIN Stereo Upgrade Fitting Kit (AUTOMATIC AIR CON CONTROLS)
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: FK-801-AUTO-SWC
- EAN: 7427307009667
- Warranty: 2 Years Warranty
Description
Complete fitting kit to install a Double DIN head unit and retain the use of the original steering wheel controls Hyundai i20 (2012-2014) car models
Package Includes
- Double Din Fascia Adaptor (Silver)
- Steering Wheel Control Interface
- Aerial Adaptor GT5 Socket to Male DIN
- Universal Patch Lead (Included)
Product Compatibility Chart
| Make | Model | Years | Notes |
| Hyundai | i20 | 2012 - 2014 | 1st Gen facelift |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
For vehicles with manual air con please use FK-801-SWC
Fascia Adaptor
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.
This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. Suitable for Hyundai i20 (2012-2014) car models with automatic air con controls
COLOUR: SILVER
Steering Control Adaptor
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. This cable fits cars with Mini ISO and ISO connectors. The speaker ISO connector is not included because the cars original speaker connector will plug directly into the new aftermarket radio connectors.
Includes ISO power only wiring to connect the car to the aftermarket head-unit.
Includes phone functions
Aerial Adaptor GT5 Socket to Male DIN
Radio antenna cable adapter for converting the original car radio plug to use with aftermarket head units. This cable converts the car radios existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.
Universal patch lead
This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. This item has loose wires and leads so it can be configured to suit the brand of radio being fitted.
Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.
Important Fascia:
- The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units.
- China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
- We do not take any responsibility for China units not fitting as they are not industry standard size.
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification" may be necessary or needed.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the shape & connection in the picture listed is the same as you have in your vehicle. If in doubt please Contact US with your vehicle details and we will confirm what you require.
