Complete fitting kit to allow you to change the original factory fitted car radio in a Land Rover Freelander 2 with basic audio system for a Double DIN after market unit and retain use of the original parking sensor tones.

Package Includes

• Double Din Fascia With Fitting cage
• Steering wheel control interface
• Parking Sensor Retention Interface
• Antenna Adaptor
• Universal patch lead (Included)

Suitable for Land Rover Freelander 2 vehicles with audio systems, vehicles with the Alpine Premium audio systems will require the amplifier to be bypassed.

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Steering Control Adaptor And Parking Sensor Retention Interface

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

Special interface for Freelander 2 with standard audio system. Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. CAN interface included with 12v ignition, and parking buzzer retention. Includes parking buzzers to maintain PDC/ original parking sensor tones.

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.  

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.

Universal Patch Lead

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. This item has loose wires and leads so it can be configured to suit the brand of radio being fitted.

Suitable for Land Rover Freelander 2 vehicles with audio systems, vehicles with the Alpine Premium audio systems will require the amplifier to be bypassed.

Important Fascia Notes: 

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.