Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit, retain the use of the steering wheel audio controls and parking sensors tones in in select Peugeot 308 (2008-2013) car models with Piano Black coloured RD4 radios.

This fitting kit allows the fitting of an aftermarket Double DIN car stereo into the cars factory dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.  

A car radio ISO lead and steering wheel control interface is also included, allowing the fitting of an aftermarket car stereo upgrade by adapting the original connector to standard aftermarket ISO connectors, as well as retaining use of the factory steering wheel audio controls.

The interface in this kit has an additional BUZZER to retain the original front and rear parking sensor tones that are usually lost when replacing the original radio.

Package Includes

• Double Din Fascia Cage Kit (Piano Black)
• Steering Wheel Control / Parking Sensor Retention
• Fakra to Male Din Aerial Antenna with 12v Power
• Universal Patch Lead (Included)

Fascia Adaptor

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia is supplied with a 103mm fitting cage so no additional fitting cage is required. The fascia adapter will give a flush mount and professional appearance to the installation.

COLOUR: PIANO BLACK

Steering Wheel Control / Parking Sensor Retention

CANbus steering wheel control and parking sensor retention interface for Citroen and Peugeot cars with quadlock connectors behind the radio.

This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo. It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio.

This interface will also allow you to access the Settings menu on the cars screen menu to change time and date.

This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony, Zenec or resistive programming Head-units.

Fakra to Male Din Aerial Antenna with 12v Power

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.

The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car.

A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.

Important Fascia: 

• The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification"  may be  necessary or needed.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the shape & connection in the picture listed is the same as you have in your vehicle. If in doubt please Contact US with your vehicle details and we will confirm what you require.