Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in a Vauxhall Vivaro, Renault Trafic, Nissan NV300 (2014 Onwards) or 2016 onwards Fiat Talento vans WITH AN ORIGINAL STANDARD RADIO

Package Includes

• Double Din Fascia (Matt Black)
• Steering Control Interface Adaptor
• Fakra to DIN Aerial Adaptor
• Fakra Male to SMB Female DAB Adaptor
• Universal patch lead (Included)

ONLY SUITABLE FOR MODELS WITH THE ORIGINAL BASIC STANDARD RADIO , FOR MODELS WITH ORIGINAL NAVIGATION SYSTEM RADIOS PLEASE USE FK-942-NAV

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This kit uses side fixing brackets to mount the new radio for a flush fit, so no cage is required. For single DIN fitting a universal pocket will need to be acquired.

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

This interface will allow you to retain the use of the steering wheel controls with a standard original radio.

Fakra to DIN Aerial Adaptor Cable With 12v Phantom Power

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.

Fakra Male to SMB Female DAB Adaptor

Use this adapter to adapt a fakra DAB connector in a car to a DAB SMB connector on an after market DAB radio.

Universal Patch Lead

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.