Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Nissan Qashqai and X-Trail (2014 - 2017) car models

Package Includes

• Double Din Fascia with Brackets
• Steering Control Interface
• Antenna Adaptor
• Universal patch lead (Included)

These cars have various different set-ups behind the radio, please remove the radio and check if you have a 24, 32 or 40 pin connector, before purchasing a solution.

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Replacement car audio facia to enable you to change the original radio in the car to a Double DIN aftermarket version 172mm x 98mm

This facia includes side fixing brackets so no fitting cage is required 

Fits Nissan Qashqai, X-Trail (2014 Onwards) car models

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

Steering wheel control interface to retain the use of the vehicles audio steering wheel controls. This interface adapts the original Nissan connectors behind the factory radio to standard ISO connectors used when installing an aftermarket head unit. Will also provide CAN ignition, speed pulse and handbrake outputs and retain the use of the original USB and AUX connections (if required) 

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. 

This is a passive antenna adapter, however there is a loose wire that needs to be connected to the antenna turn on output from the new radio, this turns on the original antenna amplifier in the car.

Universal Patch Lead

Universal patch lead for 29-CT series steering controls. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units.
Suitable for Alpine,  Clarion, JVC, Kenwood,  Pioneer, Sony and Chinese head-units that are steering wheel remote ready.

For Single DIN fitting, an additional pocket will be required

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.