Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Citroen, Fiat, Peugeot, Toyota & Vauxhall vehicles.

Only Suitable for vehicles with original factory fitted touchscreen radios.

Package Includes

• Double Din Fascia (Matt Black)
• Steering Control Interface
• Double Fakra To Din Antenna Adaptor
• Universal patch lead (Included)

Fascia Adaptor

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation.

COLOUR: MATT BLACK

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

This interface adapts the original connectors behind the factory radio to standard ISO connectors used when installing an aftermarket head unit.

Although this interface will retain original features of the vehicle such as date, time and temperature display, you will lose the ability to access some of the car settings that were otherwise accessible via the original factory fitted touchscreen unit.

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.  

A Double phantom powered Fakra to DIN antenna adapter is included with the interface. This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers.
it also provides a power feed to give 12 volt from the car radio to the cars amplified antenna.

Universal Patch Lead

Universal patch lead for 29-CT series steering controls. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units.

Suitable for Alpine,  Clarion, JVC, Kenwood,  Pioneer, Sony and Chinese head-units that are steering wheel remote ready.

Important Fascia: 

• The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification"  may be  necessary or needed.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the shape & connection in the picture listed is the same as you have in your vehicle. If in doubt please Contact US with your vehicle details and we will confirm what you require.