InCarTec SFK-FIA2-RC165 Fiat 500 165mm (6.5") BLAM RELAX Rear Side Hatch Speaker Upgrade Fitting Kit
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: SFK-FIA2-RC165
- EAN: 7427306992250
- Warranty: 2 Years Warranty
Available Options
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Fiat | 500 | 2008 - 2016 | (1st Gen) Rear side hatch speakers Only |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Provide a sound upgrade to your Abarth/ Fiat 500 (2008-2016) rear side hatch speakers with our 165mm (6.5 inch) BLAM RELAX 165RC coaxial speaker upgrade fitting kit. Each fitting kit contains a set of BLAM Relax 165RC 165mm (6.5inch) Hi-efficiency 2ohm, 2-Way Coaxial speakers.
This Coaxial speaker fitting kit will only fit Abarth/ Fiat 500 (2008-2016) standard audio rear side hatch speakers
This Complete Speaker Fitting Kit Includes
- BLAM Relax 165RC 165mm (6.5inch) Hi-efficiency 2ohm, 2-Way Coaxial speakers (Pair)
- 165mm Rear side hatch speaker adapter panels (Pair)
- Speaker adapter cables (Pair)
BLAM Relax 165RC 165mm (6.5inch) Hi-efficiency 2ohm, 2-Way Coaxial speakers
A pair of BLAM Relax 165RC 165mm (6.5inch) Hi-efficiency 2ohm, 2-Way Coaxial speakers (PAIR)
This system includes two 165 mm (6.5”) woofers, two coaxial 20 mm (3/4”) soft dome tweeters and two integrated 6 dB/octave crossovers.
Specifications
- High sensitivity 2-way coaxial system
- 165 mm (6.5’’) woofer
- Max power 150 W – Nominal power 75 W
- Frequency response 60 Hz – 25 kHz
- Sensitivity 95 dB – Impedance 2 ?
165mm Speaker Adaptor Panels
A pair of rear side hatch car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers
Speaker Adaptor Cables
A pair of speaker adapter cables for various Abarth and Fiat vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.
Composition
- 2 Woofers
- Composite basket reinforced in glass fiber
- High quality treated cellulose pulp membrane
- Butyl rubber surround
- Long life “Conex” damper
- 25 mm (1’’) voice coil with Kapton former
- 85 mm x 17 mm (3.3’’ x 0.7’’) motor assembly (Y30)
- Thick magnetic circuit (5 mm)
- 2 Coaxial tweeters
- 20 mm (3/4’’) high quality soft dome coaxial tweeter
- N38 neodymium motor
- Integrated crossover 6 dB/octave
May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bowers and Wilkens or Harman Karon have different speakers with different connections. Please check your original speaker connections match the pictures before purchasing.
