Wiring Harness ISO stereo harness adaptor leads allow the connection of your new after-market head unit to the original radio connector without the need to cut any of the existing wiring. Supported radio include Alpine, Beat, Blapunkt, Clarion, JVC, Kenwood, Pioneer, Panasonic, Sony, Zenec. It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and the other end into your new radio, without the need of tools or cutting of wires.
Brand: Connects2
Model: CT20PO02
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
£14.99
Ex Tax:£14.99
Brand: Connects2
Model: CT51-PO04
This adapter allows an aftermarket head unit to be installed, while retaining the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.Features:CAN-Bus
Park Brake
Reverse
Ignition
Illumination
Amp Retention..
£199.99
Ex Tax:£199.99
Brand: Dynamic Sounds
Model: DS2-32-4
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
£24.99
Ex Tax:£24.99
Brand: InCarTec
Model: 20-187-IGN
Radio replacement adapter cable with built in CANbus ignition interface for Porsche cars with original CDR24 or PCM2/2.1 audio systems. These cars have ISO connectors at the back of the head unit.Plug and play installation.This adapter does not retain the original Bose amplifier, an ..
£69.99
Ex Tax:£69.99
Brand: InCarTec
Model: 23-245
MOST fibre optic interface designed to retain the use of the original fibre optic amplifier in Porsche Boxster or 911 to allow the fitting of an aftermarket radio upgrade.The interface connects at the back of the radio, it takes the phono audio output from the new radio and converts it to a digi..
£249.99
Ex Tax:£249.99
Brand: Connects2
Model: CT51-PO02
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.Features: Allows the installation of an aftermarket head unit into a vehicle with..
£69.99
Ex Tax:£69.99
Brand: Connects2
Model: CT51-PO03
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.Porsche Cayenne Active System Adaptor. Supplied With ISO & Quadlock ConnectorsC..
£249.99
Ex Tax:£249.99
Brand: Connects2
Model: CT20PO01
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
£39.99
Ex Tax:£39.99
Brand: InCarTec
Model: 20-321
Amplifier bypass cable for Porsche cars built between 2004 and 2013 with PCM 2.0 and BOSE.
Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the front seat while retaining the original subwoofer and its dedicated amplif..
£99.99
Ex Tax:£99.99
Brand: Connects2
Model: CT53-PO01
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..
£39.99
Ex Tax:£39.99Showing 1 to 10 of 10 (1 Pages)