Volkswagen

CANBUS steering wheel control interface for Volkswagen with original Comand APS NTG2.5 head units.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs a..

For VW group cars with K bus steering controls.  Golf IV(2000-2003), Passat B5 GP(2000-2005) Seat Alhambra/ VW Sharan (2000-2010) VW Bora & Jetta (2000-2003) Audi A3 (2000-2003) Includes Ignition and steering controls only.  The cable harness includes ISO connectors and Phono cable..

Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel co..

PIONEER CD SVW UAR 003Interfaces Some VW vehicle features with head unit display Mk5 & Mk6 Golf & similar platform vehicles.Will Work With The Following Ranges:AVIC F8** AVIC Z8** AVIC Z9** AVH Z9200 Not with the EVO 64/93TECHNICAL NOTE:CAR AUDIO FITTING A..

Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel co..

CTSVW002K.5UARTThis only works with vehicles working on the MIB PQ platformInterfaces heater controls Interfaces parking sensors All on the kenwood screen with touch controlWorks withDNX518VDABS DMX8019DAB DMX8020DAB DNX7190DAB..

CANbus steering wheel control interface for various Mercedes cars. Gives CANbus Ignition outputs and retains steering wheel controls. The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.This CANbus interface will allow you to retain the audio ..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse, handbrake and illumination signals.The cable adapts from the ..

Steering wheel control interface and adapter cable for various Mercedes cars to fit an aftermarket radio upgrade.The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.The CANbu..