Car Audio Stereo Installation kit for installing a new after market Single din headunit into your Volkswagen. This is complete kit including Fascia Trim Panel, Wiring Harness and Aerial Adaptor.

Package Includes

• Single/ Double Din Stereo Fascia Adaptor
• Wiring Harness Adaptor
• Twin Fakra to DIN Antenna Adaptor

THIS KIT DOES NOT SUPPORT STEERING WHEEL CONTROLS OR OPTICAL PARKING SENSORS.

The harness supplied in this kit will produce an ignition generated live supply to work directly
on and off with the ignition key.
The antenna adapter also suits dual antenna connection being separate or joined from the rear of the factory fitted unit.
No cage is required for installing your new single din unit.
Remove the cage and trim from your new stereo and screw the side plates to the sides of the new stereo.
Some additional screws may be required to suit your new unit depending on the make and model you are installing.
Only suits vehicles with the following MIB-PQ platform style of Quadlock connector found on VW models from 2015 and newer.

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Wiring Harness

The wiring harness will allow to install the stereo.

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.  

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.